archive-am.com » AM » C » CROWNCHEMICAL.AM

Total: 192

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • www.crownchemical.am
    Mineral based tile joint filler is suitable for indoor and outdoor application Designed for filling seams of wall and floor in dry and moisture areas Application After finishing the installation of tiles add required quantity of water to joint filler powder mix and fill the joints To obtain required color mix with water resistant Crown Chemical pigment Clean the residual powder from tiles before and after curing Package 2kg paper

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/86 (2012-12-22)
    Open archived version from archive


  • www.crownchemical.am
    Cement based Crown grout is applicable for concrete foundations building columns filling cracks joints holes etc It can compensate cement shrinkage Application The surface must be cleared from grease dust dirt etc Applicable surface must be wet Add water to Crown Grout dry mixture and mix thoroughly for 3 minutes After mixing start working process providing conditions for release of air from the filling space Package paper bag 25kg 2011

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/78 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    Cement based façade putty is suitable for outdoor application Available in two colors white and grey Application Applicable surface must be cleared from the remaining paint wallpaper grease and dust Before application the surface must be wet or washed with water Add dry mixture to the water mix until it becomes smooth Apply with a scraper Mixture must be used within 2 3 hours Package 20kg paper bag 2011 All

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/50 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    putty is suitable for indoor application Designed for filling cracks holes smoothing the stone walls and concrete Application Applicable surface must be cleared from the remaining paint wallpaper grease and dust Add chalk putty to the water and allow materials to mix thoroughly Apply with a scraper To remove big roughness of the wall apply double layer of the putty To get a final smoothness use sandpaper Package 4kg 15kg

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/49 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    Gypsum putty is suitable for filling cracks holes of walls and ceilings Application Applicable surface must be cleared from the remaining paint wallpaper grease and dust Add gypsum putty to the water and allow materials to mix thoroughly for at least 3 5 minutes Apply with a scraper To remove big roughness of the wall apply double layer of the putty To get a final smoothness use sandpaper Package 5kg

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/48 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    dry mixture is applicable for concrete stone brick tile and other surfaces It creates hard no deforming waterproofing coating Application Applicable surface must be clean thick and absorbent Add dry mixture to the water and allow materials to mix thoroughly for at least 5 minutes Apply with scraper Each layer applies on the already hardened but not yet dried up surfaces Mixture must be used within 1 5 hours Package

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/47 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    indoor and outdoor application Designed for fixing ceramic tiles natural and artificial stones plasterboard and other materials with a durable surface It is fully compatible with under floor heating system Water and frost resistant Application Surface must be smooth dry and clean Apply tile adhesive on the surface with a toothed scraper Necessary changes with the tile fixing can be done within 15 minutes Mixed adhesive must be used within

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/46 (2012-12-22)
    Open archived version from archive

  • www.crownchemical.am
    adhesive Eco is suitable for indoor application Tile adhesive designed for fixing on wall and floor ceramic tiles to the concrete brick surfaces It can be used in dry and moisture areas Application Applicable surface must be clean dry and smooth Less absorbent surfaces should be pre moistened Mix dry adhesive with water Ready adhesive apply on the surface with a scraper Mixed adhesive should be used within 4 hours

    Original URL path: http://www.crownchemical.am/en/products/view/category/products/sub/23/gallery/45 (2012-12-22)
    Open archived version from archive